Air / Hydraulic Lubrication Gun
Delivery: 8 ounces
/ 30-60 seconds
Weight: 153 Lbs.
Lube Sealant Size: V,
P-4
PSI Rating: 10,000
Overall Dimensions: 46”H X 20”W
X 26”L
Priming: Self-Priming Air / Hydraulic
CFM Required: 20
Air Pressure Required: 75 - 100
PSI
Pressure Delivered through a 10 foot hose at 100
PSI:
Lube Sealant - 8,000 PSI
Valve Flush - 10,000 PSI
Gauge: Included
Lube Pack Compatible: Yes
Internal Relief Valve: Yes |
|
The Val-Tex QS-5000-C
is a compact, easy to transport, fast, versatile, heavy
duty lubrication unit that will pump large volumes of
stick lube sealant, lube packs, and Valve
Flush. The QS-5000-C
is quickly separated into two parts by removing the
cylinder for easy loading and unloading by one person.
Assembly is as simple as inserting the two catch pins
to secure the cylinder clamps to the frame.
The QS-5000-C
has the largest stick lube sealant capacity in the valve
lubrication industry. The Val-Tex
five pound V-stick, four pound P-4
Lube Pack, and one gallon Valve
Flush (VF-GAL) are designed to drastically reduce
the frequency of loading.
The QS-5000-C's
four inch pneumatic tires allow the unit to be maneuvered
easily by one person. The rugged sealant cap wrench
has 16 ounce graduations to allow the operator to control
the amount of material being loaded. The unit comes
complete with a 10 foot, 3/8 inch I.D. high pressure
hose, quarter turn shut-off / bleeder valve, 15,000
PSI gauge, Gauge Guard, dual swivels, giant buttonhead
coupler, and metal hydraulic fluid reservoir. The hydraulic
pump requires only periodic maintenance and has an internal
safety relief valve set at approximately 10,000 PSI
to prevent over-pressuring.
Options
Available
- Sight
glass modification to the metal hydraulic pump reservoir
allows the operator to monitor the amount of material
being pumped.
- Air
regulator (8607) rated for 3,000 PSI input and gauge
(2052L160) rated to 160 PSI. Be
sure to refer to your company’s policies before
using anything other than compressor air for your
power source.
- Moisture
separator (5604-2) and airline lubricator (5904-2)
for protection for the pump.
|
|
 |
Part
No. |
Item# |
Description |
Qty. |
5001A |
1 |
Cylinder Assembly Complete |
1 |
5001A-1 |
2 |
Sealant Cap Assembly Complete |
1 |
5001A-1A |
3 |
Sealant Cap |
1 |
5001-1B |
4 |
Air Return Fitting |
1 |
328034 |
5 |
Air Quick Disconnect-Male |
1 |
5001A-1C |
6 |
Lube Pack Extension |
1 |
5001-1D |
7 |
Dowel Pin |
6 |
5001-1E |
8 |
Hydraulic End Cap O-ring
|
1 |
5001A-1F |
8A |
Sealant Cap O-rings |
1 |
5001A-2 |
9 |
Cylinder Body |
1 |
5001-3 |
10 |
Piston Assembly Complete |
1 |
- |
- |
Consists of: |
- |
5001-3A |
11 |
Piston Body |
1 |
5001-3B |
12 |
Snap
Ring |
2 |
5001-3C |
13 |
Piston
Seal Retainer |
2 |
5001-3D |
14 |
Upper
& Lower Seal Sets |
2 |
1408-A |
15 |
Cap Screw Bleeder 5/16”-24NF |
1 |
1408-BA
|
16 |
Copper
Washer |
1 |
| 5001A-4
|
17 |
Hydraulic End Cap |
1 |
|
BB-12 |
18 |
1/2”
NPT Body Bleed Fitting |
1 |
| 5002-1-C |
- |
Hydraulic
Hose Assembly |
1 |
| HQD-14-N-M |
- |
Hyd.
Quick Disc. Nipple 1/4” (M) |
1 |
| HQD-14-C |
- |
Hyd.
Quick Disc. Coupler 1/4” (F) |
1 |
| PA-6-M-2 |
- |
Hydraulic
Pump – Metal Reservoir |
1 |
| 328030 |
- |
Air
Quick Disconnect (F) |
1 |
|
Part No. |
Description |
Qty. |
| 328034 |
Air
Quick Disconnect (M) |
1 |
| 5016 |
Sealant
Hose Assembly |
1 |
- |
Consists
of: |
- |
6 |
Giant
Buttonhead Coupler |
1 |
321320 |
Straight
Swivel 1/4” X 1/4” |
1 |
15MGF
|
15,000
PSI Gauge |
1 |
GC-250 |
Gauge
Guard |
1 |
.25
TEE |
1/4”
Tee |
1 |
38-120 |
Hose
– 10’ X 3/8” |
1 |
331107 |
High
Pressure Z-Swivel |
1 |
319700 |
Shut-off
/ Bleeder Valve |
1 |
1/4
IN CPLG |
1/4”X1/4”
Coupling |
1 |
|
5020-C |
Compact
Cart |
- |
- |
Consists
of: |
- |
5020-1-C |
Sealant
Cap Wrench |
1 |
MINI-
QS-5000 |
Compact
Cart |
1 |
5020-3 |
Pneumatic
Tire |
2 |
5020-4 |
Handle
Grips – 1” |
3 |
SC-14
|
1/4”
G.B. Lube Fitting |
1 |
| OPTIONS
|
- |
- |
| 2052L160 |
0-160
PSI Gauge |
1 |
| 5035 |
O
Shaped Sight Glass |
1 |
| 5040 |
Hydraulic
Fluid - 1 Gallon |
1 |
| 8607 |
Air
Regulator |
1 |
|
|
